Mantis-Style Phaetus APUS + Rapido UHF toolhead for Voron 2.4 - Carbon Fiber Gantry w/ toolhead PCB or STOCK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light and good looking mantis-style toolhead for the voron 2.4 that uses the Rapido UHF/APUS combo from Phaetus
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 2868
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks.
Fusion files can be found here: https://a360.co/45f8loX
BOM for stock printer (NO PCB) (stock formbot printer):
- 2x 5015 blower fan
- 1x 3010 fan
- 1x APUS extruder
- 1x Phaetus Rapido UHF
- 1x BLtouch
------------------------------------------
BOM for PCB toolhead (stock ldo printer):
- 2x 5015 blower fan
- 1x 3010 fan
- 1x APUS extruder
- 1x Phaetus Rapido UHF
- 1x BLtouch
- 1x LDO Toolhead Wiring Kit https://docs.ldomotors.com/en/voron/toolhead_harness
- 1x 3/8 inch Split Cable Management Sleeve (Preferably a weave like this: https://www.amazon.com/gp/product/B0BFHWFT95/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)
- Lots of zip ties
For the PCB toolhead, you will want to zip tie the cables to the top exhaust vent of your printer (see images). It is important there is no extra slack in the line so the cable doesn't get caught anywhere. Unfortunately I have not designed any version of this that has a PCB and also the chain attached to the x gantry.
If you want to use a carbon fiber extrusion for the x gantry, you must also print the modified gantry joints
