1 / 15
RatRig IDEX Toolheads for Dragon UHF and horisontal Toolboard — zdjęcie 1
1 / 15

RatRig IDEX Toolheads for Dragon UHF and horisontal Toolboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

here is my custom design with a lot of small changes

Ocena
0 / 5
Polubienia
16
Pobrania
53
Wydruki
0
Wyświetlenia
610
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

the horisontal toolboard mount is made to fit the high temp cable from 3DO

3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone

----------------------------------------------------------------------------------------------------

on the T1 front, the screw is moved to make room for the hotend
i didn't want to expose the belt to the heat from the hotend

so this clamp is smaller than the T0 clamp

 

all these cutouts have been made to fit the hotend and to be able to remove the silicone sock

 

special cutout to hold the thick stiff heater wires

 

clamps have extra screw for a firm secured belt

 

the step files have a 60 degrees chamfer for the hotend screws 
that's because i used carbide mill inserts crews
feel free to change your step file to 90 degrees chamfers

Tagi