1 / 15
RatRig IDEX Toolheads for Dragon UHF and horisontal Toolboard — image 1
1 / 15

RatRig IDEX Toolheads for Dragon UHF and horisontal Toolboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

here is my custom design with a lot of small changes

Rating
0 / 5
Likes
16
Downloads
53
Makes
0
Views
611
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

the horisontal toolboard mount is made to fit the high temp cable from 3DO

3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone

----------------------------------------------------------------------------------------------------

on the T1 front, the screw is moved to make room for the hotend
i didn't want to expose the belt to the heat from the hotend

so this clamp is smaller than the T0 clamp

 

all these cutouts have been made to fit the hotend and to be able to remove the silicone sock

 

special cutout to hold the thick stiff heater wires

 

clamps have extra screw for a firm secured belt

 

the step files have a 60 degrees chamfer for the hotend screws 
that's because i used carbide mill inserts crews
feel free to change your step file to 90 degrees chamfers

Tags