1 / 7
Apple AirTag case for the Navee N65 scooter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple AirTag case for the Navee N65 scooter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
An Apple AirTag case for the Navee N65 scooter.
I tried to make this case as simple, sturdy and discret as possible.
The case replace the front light reflector.
BOM
- M2 x 8mm screws (x4)
- M2 nuts (x4)
- Sticking light reflector band (optional)
Print setup:
- Material: PETG
- Layer high: 0.2mm
- Infill density: 20%
- Support: Yes / Pattern: Concentric
Mounting instructions:
On the case:
1/ Place the AirTag in the case.
2/ Seal the case with the four M2 screws.
3/ (Optional) Stick some light reflector band on the front part to replace the removed one.
On the scooter:
1/ Unscrew the M4 screw that holds the front light and the light reflector.
2/ Remove the light reflector.
3/ Replace it with the case.
Done!