1 / 7
Apple AirTag case for the Navee N65 scooter — image 1
1 / 7

Apple AirTag case for the Navee N65 scooter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Apple AirTag case for the Navee N65 scooter

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
234
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

An Apple AirTag case for the Navee N65 scooter.
I tried to make this case as simple, sturdy and discret as possible.
The case replace the front light reflector.

BOM

  • M2 x 8mm screws (x4)
  • M2 nuts (x4)
  • Sticking light reflector band (optional)

Print setup:

  • Material: PETG
  • Layer high: 0.2mm
  • Infill density: 20%
  • Support: Yes / Pattern: Concentric

Mounting instructions:

On the case:
1/ Place the AirTag in the case.
2/ Seal the case with the four M2 screws.
3/ (Optional) Stick some light reflector band on the front part to replace the removed one.

On the scooter:
1/ Unscrew the M4 screw that holds the front light and the light reflector.
2/ Remove the light reflector.
3/ Replace it with the case.

Done!