Case for SATA 22 pin to USB 3.0 adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case that i made because i needed a less wider one than the original.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I made this because the original wouldn't fit the HDD Caddy from @Squirtle in my HDD Cage by @MattHope. I used inserts because i love them. I also shared the .f3d file if you want to change the model.
The base model is the classic SATA to USB 3.0 adaptor with 12V line you can find on aliexpress and other eshops, i will also share a photo of the original design (Just open it with a screwdriver it has no glue or screws inside).
This is the first one i found but you could find other sales without the 12V power supply if you don't need it for 3.5" Drives or if you already have one.
in this state it need 3 M2x4x3.5mm inserts and 3 M2x6mm screws (you could also glue it to death).