1 / 5
Case for SATA 22 pin to USB 3.0 adaptor — image 1
1 / 5

Case for SATA 22 pin to USB 3.0 adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case that i made because i needed a less wider one than the original.

Rating
0 / 5
Likes
4
Downloads
33
Makes
0
Views
246
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I made this because the original wouldn't fit the HDD Caddy from @Squirtle in my HDD Cage by @MattHope. I used inserts because i love them. I also shared the .f3d file if you want to change the model.

The base model is the classic SATA to USB 3.0 adaptor with 12V line you can find on aliexpress and other eshops, i will also share a photo of the original design (Just open it with a screwdriver it has no glue or screws inside).

This is the first one i found but you could find other sales without the 12V power supply if you don't need it for 3.5" Drives or if you already have one.

Aliexpress link

in this state it need 3 M2x4x3.5mm inserts and 3 M2x6mm screws (you could also glue it to death).

 

Tags