1 / 4
Dual MOSFET X-Bracket Remix for (Un)-Original Prusa Drybox — zdjęcie 1
1 / 4

Dual MOSFET X-Bracket Remix for (Un)-Original Prusa Drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model adds a second MOSFET into the original form factor of the Heated Drybox X Bracket

Ocena
5 / 5
Polubienia
10
Pobrania
40
Wydruki
1
Wyświetlenia
324
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mod to allows for mounting two MOSFETs in @BramElema 's  original X-bracket for the excellent Heated (Un)Original Prusa Drybox.

I am working on an option for a third MOSFET as well, to accomodate @KrennW_1433816 ‘s code. Werner is up to 3 MOSFETs for independent fan and heater control, and then LEDs. I haven’t yet worked out the DC pigtail mount on that model yet, so that will be along soon.

I know that there are different sizes of MOSFETs shipping with the BLUROLLS kit for this project. I have not tested this design with anything other that the shorter MOSFET. There is also a mounting peg for the shorter MOSFET on the bottom MOSFET. If you have a longer one, you will have to break it off. PLease do let me know if I can adjust the model for the larger MOSFET – I tried to accommodate it in the design, but do not have one onhand to test.

I print it in PCCF, for heat tolerance, but PETG works too. I used the .2mm Structural MK4IS profile with a .4mm nozzle. 

Tagi