Knob for Jobmate Drill Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Jobmate 55-5901-6 drill press or anything that needs a similar knob with an M8x1.25 thread.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was given a Jobmate 55-5901-6 drill press but it was missing one of the knobs, and another one is cracked and likely will eventually break. I created this replacement part.
It has modeled M8x1.25 threads with loose enough tolerances that it shouldn't need to be tapped assuming your printer is relatively accurate. (Tested on a stock Bambu Lab P1S)
I designed this to be printed without supports. My final print was done in black PETG at a 0.2 layer height with no supports, and I also did a test print in PLA which worked fine. Print in the supplied orientation. Do not rotate.