Knob for Jobmate Drill Press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Jobmate 55-5901-6 drill press or anything that needs a similar knob with an M8x1.25 thread.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was given a Jobmate 55-5901-6 drill press but it was missing one of the knobs, and another one is cracked and likely will eventually break. I created this replacement part.
It has modeled M8x1.25 threads with loose enough tolerances that it shouldn't need to be tapped assuming your printer is relatively accurate. (Tested on a stock Bambu Lab P1S)
I designed this to be printed without supports. My final print was done in black PETG at a 0.2 layer height with no supports, and I also did a test print in PLA which worked fine. Print in the supplied orientation. Do not rotate.