Counting matching models…
Platform with 25mm height for Nespresso CitiZ to lift the cup higher so it does not splash when making a coffee. Fits into bottom center hole so it stays in a fixed position. If you have any questions or need a different height, feel free…
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
Mount your pressure washer foam cannon right to your pressure washer frame. I specifically designed this mount for the Simpson 3400 PSI 2.5 GPM model pressure washer. For any modifications, here's a link to make a copy of my 3D geometry…
Parktool Press Fit BBT-90.3 Component 2x M16 nut 200mm M16 threaded rod
This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…
Adattatore Zburns modificato per stampare senza supporti e con PTEG. Non mi fido del PLA per oggetti come questi che devono essere più scanalati. si prega di usare cautela quando Impostazioni di stampa Marca della stampante : Creatività…
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
This is a remix of the Nespresso capsule holder created by @Peter. I made this so it could fit my DeLonghi Inissia coffee machine. 3 different sizes available 180mm original author version (3x5 capsules) 150mm (3x4 capsules) this version…
Ce support permet de placer un RUT 240 et le célèbre 4G Wireless Routeur sur un tube et de le monter/démonter rapidement. Pour la mâchoire, prévoir 2 boulons M6x50 avec écrous, faire une pause pendant l'impression de vis.3mf pour insérer…
Spojka vysokotlaké myčky HECHT 323
I needed a template of the fixture plate for a Harbor Freight Bauer drill press to model up work-holding solutions.
Wall mounting bracket for a compressor water separator.
After not finding a rack for my 30mm paints, I decided to create one! This rack is made up of 24 spaces for your 30mm/ml paints It prints easily, with only a 190g cost in less than 5h! It is distributed in 6x4 although if I see a good…
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
A funnel and stand for the original Bialetti Mokka Express to fill the basket with ease. Both peaces fit into the Bialetti when its not in use.
EN: To identify a fluid ring condenser or fluid ring vacuum pump or operating controls for switching this equipment on or off. DE: Kennzeichnung für eine Rotationskompressor, Flüssigkeitsring-Typ; Vakuumpumpe, Flüssigkeitsring-Typ. Zur…
I used: PETG .2mm Layers 4 Walls 20% Cubic Infill No Supports Opening for soldering iron is .7'' (18mm). You may have to scale +/- to fit your soldering iron.
Hi! I want to introduce you my drill press for Dremel/Parkside multitools. It's easy to print and assemble - you only need a few screws and nuts to put it together. IMPORTANT NOTE: Print “Lock_nut_Parkside.stl” and/or…
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
The multimedia system on my motorcycle (a 2022 Honda NT1100) supports CarPlay or Android Auto, so I purchased an inexpensive module from AliExpress with this functionality. Since the module cannot withstand harsh weather conditions, I…
I was going to just buy one from Flair because they're only a few bucks, but shipping brought the cost to nearly 10, plus there's all the carbon involved in the shipping. Figured it was better to spend 5min in F360 and 5 pennies in…
A simple shelf for holding multiple molds in a pressure pot, its a 9 1/2in diameter pressure pot. the cone and ball make a simple handle, see picture for orientation, there is a divot in the ball for the top of the cone, I used super glue…
Water lid for a Nespresso machine. I printed it in PETG, due to what was already on the MK4. I added fuzzy skin to add a textile feeling when removing the lid.
This is merged core for Stealth Press 1S, for those having big size printers like Prusa XL and willing to print all in once. You can review and download full Stealth Press 1S — heat set insert press project here.
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
A practical mold for shaping perfectly round burger patties that hold their form during cooking. Easy to use and ensures consistent size and shape every time. Ideal for creating professional-looking burgers at home without hassle.
Espresso Puck Prep Station to both level and elevate a Rancilio Silvia Bottomless Portafilter https://amzn.to/4hn7AzP . Modular 2-part print (separate leveler and riser) Leveler levels and stabilizes the naked portafilter so it's…
Nespresso Capsule Holder Holder For Nespresso Coffee Capsules Holds 3x3 Capsules (9 Capsules Total) How I Printed It: THIS IS ALSO HOW I RECCOMEND IT TO BE PRINTED :) Printer: Creality Ender 3 S1 Material: PLA Nozzle Diameter: 0.4 mm…
FRENCH: cette pièce permet d'évacuer les anciennes amorces lors de l'opération de désamorçage sur une presse à main automatique Lee Load-Master. Sans cette pièce les amorces tombent en vrac dans le cylindre et salissent rapidement…
The coffee pod recycling bin made by Nespresso looks nice, but the wet capsules at the bottom of the bin are almost guaranteed to grow mold. This drip grill is designed to be placed at the bottom of the bin ( without bag ), in order to…
I made 3 upgrades for the Heat insert press, which is great by itself and I recommend it. I really like it. I have printed all on Prusa MK4S or XL with 0.4mm nozzle using 0.20mm layer height. As material goes, you can use anything you…
This adapter allows you to place the AeroPress directly on the opening of a HARIO Range Server 01 and extract the coffee directly into the carafe. I tested it successfully with the HARIO Range Server 01 (not with the bigger variants) and:…
The Breville Nespresso Essenza machine is a great device with a tiny footptint. However due to its small size the wastewater reservoir often overflows creating a mess on the counter. I had designed an overflow/spill tray to address that…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl designed for me and shared with u, works great ;) for the following guide i…
I found the original opening for the portafilter to be too small, and I wanted a way to include my WDT Tool as part of it. I have left these as .3mf files so the openings/etc can be easily tuned as needed. I used Dacy's tray and storage…
Well as written less press fittings. As a question for the creator. can we get the step file i would like to further improve the design but i cant do that with the stl
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
EN:Store your pods with ease. The attachment can be done with a hook (which won't damage your stand) or with screws. If you prefer, you can customize the attachment with a generic 3D model provided to add a magnet, for example. You can…
" This is a tweak on ALR's excellent design so you don't need to buy new bolts but can use the bolts already in the Pixie Nespresso machine. It's otherwise the same, you slide capsules to the top where it's a little wider so you can get…
the rock, the top hat, and the tamper, a perfect combination for your coffee shop.
I truly hope you enjoy this funny little coffee sign (oh…please hit the like button if you like this). I've included two models. One is what is pictured and the second has a hole in the top for hanging on a nail. I don't have an AMF…
Original Model (by Mause77 on makerworld) did not fit nicely with the capsule holder I am using . My version should snap snugly onto the bottom feet, support more weight, and has more curved edges for a better counter-top experience.…
Aeropress Holder – The Ultimate Brew Station Your AeroPress has probably been through countless brews, early mornings, and last-minute caffeine emergencies. Whether it’s fresh out of the box or a battle-hardened veteran with years of…
Streamline your coffee-making routine with our custom 3D-printed holder designed to fit circular espresso filters measuring 64–65 mm in diameter. Crafted with precision and simplicity in mind, this holder keeps your filters neatly…
With the flat drip tray, taller cups also fit under the machine. Support is required due to the overhang and the hook-in opening.
Here is an espresso holder ive created to hold all my accessories for my machine. I had an example then modified it to fit my stuff a bit better and hold more. printed with PLA, 5 walls and 10% infill. everything fits very well if youre…
DEUTSCH: Einfaches, schnell zu druckendes Ersatzteil für einen handelsüblichen Werkstattkompressor von Marken wie Rowi, Parkside, Güde, Workzone, Einhell, Scheppach und wie sie alle heißen mögen. Druckt es auf der Seite liegend mit…
If you start drinking decaffeinated coffee, do you need to print a new dispenser? And what happens if you run out of capsules of a coffee you don't want to buy again? This elegant model is designed to store Nespresso capsules in a modular…
Vrstva 0,16mm, 45% výplně, materiál ASA. 6mm vratový šroub, pružina, podložka a křídlová matice. _______ Layer 0.16mm, 45% infill, ASA material. 6mm gate bolt, spring, washer and wing nut.
A practical holder for the AeroPress coffee maker, designed for storage or air-drying. It can be easily mounted under a shelf using wood screws. When not in use, the holder remains unobtrusive and takes up minimal space. The AeroPress…
Are you a fan of the AeroPress but wish it was bigger? Do you own multiple AeroPress devices but are hesitant to buy the more expensive AeroPress XL? Then the AeroPress Extender’a’tor is exactly what you need! With the AeroPress…
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
Ersatzantriebsrad für Dremel Bohrständer Workstation 220 drive gear for Dremel Workstation 220 drill stand
Updates 4/28/2026 - uploaded additional "narrow" version of the original model per request, which now has a width <220mm 5/26/2025 - added additional clearance to the stirrer stick slot on the Alt model to accommodate the wider version of…
This is a protective sleeve for a pressure gauge of a pressure washer. P/N of the gauge is NILFISK 301000246 - 300bar, 1/8" BSP (28 tpi) thread, OD roughly 41mm, length 26,5mm. Printed out of TPU, 3 outside layers, 25% infill.
the Original turned out not that nice after printing. Surface was rough due to the huge overhang. thats why i decided to design my own. And since i am a big fan of Zojirushi i added the cute Elephant :)
realizzazione di un proteggi viso per pistola ad aria compressa da dimetro di 6 mm
Wind sensor bracket for Aliexpress wind sensor Wind sensor bracket for Aliexpress wind sensor for wall mounting. I have a Shelly Uni installed and therefore needed a 0-10 V wind sensor that needs to be mounted on the wall. Here's the…
For two years I made revisions now and then, now here is it: The best filter holder made for AeroPress. Print 0.2mm layer height, no supports. Orient the plane slope at the bottom on the print bed. Standard settings. Happy printing, Simon.
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Airpump handle broke years ago so I designed this one. The original screws just barely push by but it works for me. 0.25 layer height, 4 perimeters, printed in petg.
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
I made this as an inexpensive alternative to a metal tapered piston ring compressor. It worked well on the 87mm bore Nissan SR20DE I am building. I also made one in 86mm, since that is the stock bore for the SR20 and a number of other…
This portafilter dosing funnel is larger than most. This allows for dumping from my grinder tray without making a mess, especially in the morning when I'm tired. I made it for the 58mm portafilter that came with my Gaggia Classic Evo Pro.…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
This is a simple replacement cap for the Mazzer line dosers. Internal Diameter of the doser lid is 118mm. Print it inverted with a textured bed for a nice top finish. Its not domed like the stock ones but I prefer the simple textured look…
This is a Nespresso Vertuo Coffee Dispenser rack. The original model was found at thttps://makerworld.com/en/models.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A unique espresso cup in the style of a pot. Instructions Get food safe and dishwasher save filament Print the parts…
peli 1510 to 608 bearig adapter ali pu wheels.stl - for narrow PU wheels from aliexpress (0.75 wider spacer, instead pelican wheels) peli 1510 to 608 bearig adapter.stl - for regular pelican wheels
A remixed depressor for E34M1. Use a long screw (length depends on the distance you will need).
All aboard the SteamScents Express! 🚂 This 3D-printed incense holder transforms the gentle smoke into whimsical “steam” rising from the locomotive’s chimney. Perfect for adding a touch of nostalgia and aroma to your space, this design…
This is used to install the front bearing of a Hobbywing 4268SD g3, but may work for other motors. 1) first make sure your bearing can slide over “guide - BearingCenterTool” and that “press - hammer press dowel” can also slide over “guide…
I'm no coffee expert or anything of that nature but I do like to experiment and I do like coffee. I saw either Hoffmann or Hedrick talk about using an aeropress cap to rain water onto your pourover coffee to not disturb the coffee bed.…
Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…
Simple add on of a filter paper holder to the DylanRyanDesign remix. Had to widen the whole thing a little to make room.
This is a custom charging stand for the Mobvoi TicWatch Pro 5 , designed to fit a magnetic cable from AliExpress (example link ). The design is based on the idea of the original stand , but modified to fit this slightly different cable.…
Welcome, and thank you for choosing my model. I will provide some context for this model. I created this model to store the Watch Repair Kit I purchased on Amazon. I chose for two smaller boxes instead of one large box because it is…
Coffee container designed to fit inside the AeroPress , making use of the unused space in the chamber. Perfect for travel or everyday use when you want to keep your coffee close at hand. ✅ Screw cap keeps the coffee secure ✅ Special clip…
Printing press made from printed parts, B52 Unistrut with 3/8" fasteners, 3/8" threaded rod and nuts, as well as M8, M5, and countersunk M4 screws, 4" polished steel conduit, standard 608 “skate” bearings, and a linear slide rod i had…
This is to replace the spacer in for the bosch universal plus berry press attachment. I recommend using TPU with 100% infill. There's a small slice in the spacer so it can installed onto the shaft of the adjuster for the tailings.
My Craftsman electric pressure washer was missing a cap or plug for the detergent reservoir, so I made one. It has a groove for an o-ring (size G20, 19.4mm ID, 3mm thick). The OD of the plug itself is 1.125". Also works great as a generic…
I use my Breville dual wall filter basket on my aeropress to give more of an espresso type coffee. Give it a go. You might know this from Joepresso . This is the same thing, but for a 54mm basket and designed to be 3d printed with no…
This Benchy doesn’t float—it lurks . Inspired by Jules Verne’s 20,000 Leagues Under the Sea , it’s a desktop-sized tribute to Victorian ambition, mechanical elegance, and deep-sea vengeance. The hull is plated like a leviathan, the…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Motivation For a sandblasting project I used an old air compressor. The compressor has two wheels and two steel feet measuring 45x6mm. When operating the compressor, the vibrations cause some movement of the compressor feet on the ground.…
This moddel is generally bigger/sturdier than other stands for the PicoPresso. I needed the extra size to allow me to use the Timemore blackmirror scale underneath and to be also able to use the AeroPress (not only with small espresso…
Meine Frau und unsere Tochter basteln mit Vorliebe Karten aller Art und zu jedem Anlass. Dazu verwenden sie die elektrische Stanze Big Shot der Firma Sizzix, welche leider nicht mehr hergestellt wird. Dementsprechend gibt es auch keine…
This is a remix of an outstanding design that would not work for me. I needed the ability to run a larger diameter suppressor and TandemKross grips. There is a pocket for 15mmx3mm magnets under the barrel, I do not remember if it was…
This organiser was designed to maximize drawer space and be as large as possible while fitting on a 256x256 print bed. All the components can be printed simultaneusly on a single bed without supports.
I made this tray for my Thinkpad x230. It's really small so not a lot of things can fit inside. I have printed it at 0.20mm, maybe 0.10mm will have less friction. It should also work for the Thinkpad x220 and others, but I have only…
This espresso cup riser stand is designed to sit securely in the drip tray of selected Sage / Breville espresso machines, raising smaller cups closer to the portafilter spout for improved shot control, reduced splashing, and a cleaner…
This, right here, is the Mire's beating heart. It's not one big, obvious monster that'll get you. It's the whole damned place. The air is so thick you can drink it, and the silence is so loud it rings in your ears. Every one of those…
Another Portable Drill Press, designed around the makita drill XPH07Z . It can be used with a vacuum pump to hold the position, even horizontally. The base can be used to drill round stock with its vee-groove. Makita small router base…
![Nespresso CitiZ Cup Platform [No splashing]](https://media.printables.com/media/prints/dca0da2e-8cd2-4acf-b2fa-143e065ff519/images/11938791_5519e87d-7a7d-4780-9048-79a02fc45567_f67606ad-f57a-489b-9c37-46452b94e57e/img_7881.png)
