Lever for Stealth Press (Heat Set Insert Press)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.02 – €1.25 net (excluding VAT)
For file: soldering_iron_mount_lever_right_0.2mm_PETG_MK3S_1h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.13 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.32 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple lever that can be screwed onto the soldering iron mount.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 334
- Makes
- 4
- Views
- 1,885
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Update 11/09/24: Added lever for TS100/101 and PINECIL iron mounts.
A simple lever that can be screwed onto the soldering iron mounts.
The lever model with “TS” in its name fits the TS100/101 and PINECIL mounts of the press. These are the following mounts:
- iron_mount_ts100-101_x1_r1.1.stl
- iron_mount_pine_x1_r1.1.stl
The lever without TS in the name fits the generic mounts of the press. These are the following mounts:
- iron_mount_generic_lD16_x1_r1.1
- iron_mount_generic_lD18_x1_r1.1
- iron_mount_generic_lD19_x1_r1.1
I mirrored the soldering iron mount for my make in the slicer to have the lever on the right side. So there are two versions: A left and a right version.
You need the following parts:
- 2x M3 x 16 mm Allen screws.
The model was created with FreeCAD 0.21.2.