Dremel Drill Press to T12 Solder Iron Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.99 – €8.54 net (excluding VAT)
For file: Dremel Drill Press to T12 Solder Iron Adapter R3_0.2mm_PET_MK2.5S_7h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.76 excluding VAT (range midpoint).
- Weight reported by the author
- 103 g
- Print time reported by the author
- 7.81 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adaption of Dremel's Drill Press for brass insert for T12 solder station. Modular for future and community remixing.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 59
- Makes
- 1
- Views
- 739
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I wanted to make better use of my Dremel Drill Press workstation for other pressing tasks without compromising stock utility. The system consists of a dummy rotary tool head that mates with the press and will then accept future accessories. As my T12 solder wand happens to fit without need for thermal insulation or alignment adjustment, it will be the first tool adapter created to be shared. The “tower” happens to accept 2½" (64.65mm) Picatinny rails on the sides, waiting for hardware to provide files.
Hardware:
- x8 M3 nuts (I chose Nyloc nuts)
- x4 M3 socket screws 30mm - tower
- x2 M3 socket screws 18mm - T12 clamp
- x4 M3 countersunk screws 16mm - Picatinny rail
More Slicer Info:
- Perimeter/Top-Bottom: 6/8
- Infill: 20% Rectilinear (100% for clamp)