Dremel Drill Press to T12 Solder Iron Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaption of Dremel's Drill Press for brass insert for T12 solder station. Modular for future and community remixing.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I wanted to make better use of my Dremel Drill Press workstation for other pressing tasks without compromising stock utility. The system consists of a dummy rotary tool head that mates with the press and will then accept future accessories. As my T12 solder wand happens to fit without need for thermal insulation or alignment adjustment, it will be the first tool adapter created to be shared. The “tower” happens to accept 2½" (64.65mm) Picatinny rails on the sides, waiting for hardware to provide files.
Hardware:
- x8 M3 nuts (I chose Nyloc nuts)
- x4 M3 socket screws 30mm - tower
- x2 M3 socket screws 18mm - T12 clamp
- x4 M3 countersunk screws 16mm - Picatinny rail
More Slicer Info:
- Perimeter/Top-Bottom: 6/8
- Infill: 20% Rectilinear (100% for clamp)