Heat Insert tool press bracket for Pillar drill
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: m5 screw knob.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple bracket to enable you to use your pillar drill as a heat insert press.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 142
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
A simple bracket to enable you to use your pillar drill as a heat insert press.
I was going to print one of the many designs of heat insert press tools available but then thought why not use my drill press and not have another tool top have to find a home :-) The drill press is certainly man enough and far stronger than anything I could print.
I created 2 designs, one with a locking bolt but then found it was such a good friction fit on the foam on the tool it didn't need it and the pressure is only pushing into the flange anyway so cant slip through.
Hardware Required
M8 Carriage bolt ~ 60mm
M5 nut and bolt ~ 35mm if using bolt version
Fits common Heat insert tool available from multiple suppliers on Ebay / Amazon
I printed in PLA - was initially going to just be a test but has worked fine so seems plenty strong and suitable though PETG etc may be a better option