Hamburger Patty press
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.32 – €2.84 net (excluding VAT)
For file: Burger_0.4n_0.2mm_PLA_MK4S_1h39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.58 excluding VAT (range midpoint).
- Weight reported by the author
- 52 g
- Print time reported by the author
- 1.64 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A hamburger patty press.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 90
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A hamburger patty press. For one patty, we need approximately 67g of ground meat. Place the meat into the press and compress it.
I recommend buying 1kg of ground meat, which will yield 15 patties. Store them in the freezer for later use.
Enjoy.
| Layer height | 0,15 |
| Infill | 20% |
| Perimeters | 2 |
| Standard noozle | 0,4mm |
| Material | Pla or Petg |
| Supports | No |