1 / 3
Kappe für Vierkantrohre / cap for square tubes 30 x 30 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diesen Standfuss habe ich für meine kleine Werkbank aus Vierkantrohren 30 x 30 mm, konstruiert, gedruckt und montiert.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Diesen Standfuss habe ich für meine kleine Werkbank aus Vierkantrohren 30 x 30 mm, konstruiert, gedruckt und montiert.
Print Settings
Rafts:
No
Supports:
No
**Resolution:**
0,2 mm
Infill:
20 %
**Filament:** any TPU
Notes:
TPU A85 semi-soft von Extrudr
Dieses Filament ist auch druckbar mit Bowden-Extruder.
This filament is also printable with Bowden extruder
https://www.3djake.at/extrudr/tpu-semi-soft-schwarz?sai=3867
Category: Parts