1 / 5
Chemical/Bottle Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will keep all your solvents, chemicals, and glues all together.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ABOUT:
Didn't want to fuss with Gridfiniy and all the magnets.
FEATURES:
The large round 46mm insert is for a 8.oz Lucas White Lithium Grease
The medium 43mm insert are for a 4.oz liquid Super Lube.
The smaller 34mm insert is for a 2.oz Starbond super glue.
The small 32mm inserts are for 1.oz needle bottles, and a 60.mL Bambu Lab Liquid Glue.
The long horizontal insert is for a standard 7g/0.24 oz glue stick.
There are also inserts for the StarBond Glue's nozzles, pin cap, and lid.
HARDWARE NEEDED:
(4) 13mm rubber feet for anti-skid purposes.
PRINTING SUGGESTIONS:
I would use PLA.
It shouldn't take more than 3 Hours.
I would do 10 Hex pattern infill.
Supports are optional for the feet holes on the bottom.
No brim is needed because of the large print surface.
DISCLOSURES:
No accessories included.
FINAL THOUGHTS:
Maybe someone will find this useful.
Cheers!
Visit my blog: https://www.scwd.us
Visit my YouTube Channel