1 / 5
Chemical/Bottle Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will keep all your solvents, chemicals, and glues all together.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ABOUT:
Didn't want to fuss with Gridfiniy and all the magnets.
FEATURES:
The large round 46mm insert is for a 8.oz Lucas White Lithium Grease
The medium 43mm insert are for a 4.oz liquid Super Lube.
The smaller 34mm insert is for a 2.oz Starbond super glue.
The small 32mm inserts are for 1.oz needle bottles, and a 60.mL Bambu Lab Liquid Glue.
The long horizontal insert is for a standard 7g/0.24 oz glue stick.
There are also inserts for the StarBond Glue's nozzles, pin cap, and lid.
HARDWARE NEEDED:
(4) 13mm rubber feet for anti-skid purposes.
PRINTING SUGGESTIONS:
I would use PLA.
It shouldn't take more than 3 Hours.
I would do 10 Hex pattern infill.
Supports are optional for the feet holes on the bottom.
No brim is needed because of the large print surface.
DISCLOSURES:
No accessories included.
FINAL THOUGHTS:
Maybe someone will find this useful.
Cheers!
Visit my blog: https://www.scwd.us
Visit my YouTube Channel