Sterilite Tote Handle Plug for Kratky Hydroponics
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plug for the handle holes for Sterilite Stacker Totes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Using the container for a Kratky setup. I wanted to put more nutrient solution in the container but the holes prevented that so these are plugs for the holes.
Specifically for these Sterilite Stacker Totes, I use the 4 gallon version but I don't see why they wouldn't work on any size since the handles are the same. https://www.containerstore.com/s/storage/plastic-bins-baskets/sterilite-black-stacker-totes/12d?productId=11007874
I used Silicone RTV 4500 FDA Grade High Strength Silicone Sealant to hold them in place. I made a ring of silicone on the interior of the plug and then added silicone on the outside as well. https://www.amazon.com/dp/B01F9HCFEC?ref=ppx_yo2ov_dt_b_fed_asin_title. Cured for 24 hours and has been holding water well.
I used PLA at 100% infill, two need to be printed as-is then another two need to be mirrored along the X axis, see the attached 3mf file for proper orientation. The same orientation pieces are placed diagonal from each other on the inside, use the lip for the correct placement.