Sterilite Tote Handle Plug for Kratky Hydroponics
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug for the handle holes for Sterilite Stacker Totes
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Using the container for a Kratky setup. I wanted to put more nutrient solution in the container but the holes prevented that so these are plugs for the holes.
Specifically for these Sterilite Stacker Totes, I use the 4 gallon version but I don't see why they wouldn't work on any size since the handles are the same. https://www.containerstore.com/s/storage/plastic-bins-baskets/sterilite-black-stacker-totes/12d?productId=11007874
I used Silicone RTV 4500 FDA Grade High Strength Silicone Sealant to hold them in place. I made a ring of silicone on the interior of the plug and then added silicone on the outside as well. https://www.amazon.com/dp/B01F9HCFEC?ref=ppx_yo2ov_dt_b_fed_asin_title. Cured for 24 hours and has been holding water well.
I used PLA at 100% infill, two need to be printed as-is then another two need to be mirrored along the X axis, see the attached 3mf file for proper orientation. The same orientation pieces are placed diagonal from each other on the inside, use the lip for the correct placement.