Hobie 16 Old-Style Tiller Connector Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old-style spacers used to to connect Hobie 16 tillers to the crossbar.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
These parts are used along with a nut, a bolt, and a spring to connect a Hobie 16 rudder tiller to the crossbar. Each tiller connector requires 1 large washer and 2 domes. The washers are concave on one face to improve fit-- it doesn't matter which side is up. Hobie doesn't seem to sell these parts anymore.
I printed mine out of PETG, but they cracked along layer lines after heavy use. Printing them out of PA or printing spares is recommended.
Domes are part #11510000 in the Hobie catalog.
Complete tiller connectors are part #11520005 in the Hobie catalog.
Recommended Print Settings
| Material | Nozzle | Layer Height | Strength | Supports |
|---|---|---|---|---|
| PETG / PA | 0.4mm | 0.2mm | 100% infill | No |