Mold for silicon nozzle wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printed mold to cast a silicon nozzle wiper for the K1 Max.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mold to cast a silicon nozzle wiper that you can glue to the printing plate protecting it during the nozzle cleanup in the K1 max startup cycle.
Print the mold and use high-temperature silicon sealant to cast the wipe, once cured I glued to the printing plate using the silicon sealant as the adhesive.
To make sure I would be able to remove the wiper with minimal damage to the plate, I made sure it had a layer of Elmer's glue in the plate before I glued the wiper.
I used it for some printing cycles and didn't get any problems from it.
Use at your own risk.