Mold for silicon nozzle wiper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3d printed mold to cast a silicon nozzle wiper for the K1 Max.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
This is a mold to cast a silicon nozzle wiper that you can glue to the printing plate protecting it during the nozzle cleanup in the K1 max startup cycle.
Print the mold and use high-temperature silicon sealant to cast the wipe, once cured I glued to the printing plate using the silicon sealant as the adhesive.
To make sure I would be able to remove the wiper with minimal damage to the plate, I made sure it had a layer of Elmer's glue in the plate before I glued the wiper.
I used it for some printing cycles and didn't get any problems from it.
Use at your own risk.