1 / 5
F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro — zdjęcie 1
1 / 5

F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro

Ocena
0 / 5
Polubienia
7
Pobrania
33
Wydruki
0
Wyświetlenia
341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As the F-Exx 8.0C car fire extinguisher does not come with a mount or fixture i decided to design one to fix the extinguisher somewhere in the car. This is done via a velcro, which is super glued to the bottom of the holder.  

In addition, there is an additional slot for a velcro which can be poured around the extinguisher to have it assembled even tighter. But

Finally, i also added a screw hole for a 6mm screw with flat screw heads, in case you want to screw the mount somewhere.

There is one version for the more “flat” area of the extinguisher and a version for the top and bottom region, where a cutout is made to allow for the bead.

In case you want to do some modifications, i added the Fusion 360 *.f3d file. There you can use the timeline to “jump” between the two versions.

 

Print settings:
I printed it on the side, but then support everywhere is needed. Use PETG or even better ABS as it gets really hot in cars during summer. The other print settings are standard. 15% infill, 0.2mm layer height.

It is also possible to print it standing on the bottom surface, no support needed then.

Tagi