F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
F-Exx 8.0C Car Fire Extinguisher Holder / Mount with Velcro
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As the F-Exx 8.0C car fire extinguisher does not come with a mount or fixture i decided to design one to fix the extinguisher somewhere in the car. This is done via a velcro, which is super glued to the bottom of the holder.
In addition, there is an additional slot for a velcro which can be poured around the extinguisher to have it assembled even tighter. But
Finally, i also added a screw hole for a 6mm screw with flat screw heads, in case you want to screw the mount somewhere.
There is one version for the more “flat” area of the extinguisher and a version for the top and bottom region, where a cutout is made to allow for the bead.
In case you want to do some modifications, i added the Fusion 360 *.f3d file. There you can use the timeline to “jump” between the two versions.
Print settings:
I printed it on the side, but then support everywhere is needed. Use PETG or even better ABS as it gets really hot in cars during summer. The other print settings are standard. 15% infill, 0.2mm layer height.
It is also possible to print it standing on the bottom surface, no support needed then.