1 / 3
Fender stratocaster model
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
A model i made while practicing fusion 360.
I didnt include the strings. because it would probably not end well…
Moddled in real size you will probably have to resize to print. But going too small may result in some very fragile parts. Particulary the pickup selector.
I printed things at 50% and it came out real well.
If your printing the bits seperately dont forget to scale the tuners and the jack input smaller by a % or 2 so you can actualy slot them in.
I found printing the body verticly to be the best way to avoid supports and get a nice finish on both sides.