Bambu Studio profile for Ultimaker 2+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a profile in Bambu Studio that lets me print on the Ultimaker 2+ and adjust retraction and volumetric settings
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 388
- Wydruki
- 0
- Wyświetlenia
- 1455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
The reason why I did this is because normally if you add the Ultimaker 2 Extended + to Ultimaker Cura, it won't let you adjust the settings for retraction that are most important (retraction speed and retraction distance).
Normally when you try to print with the default profile for the Ultimaker 2 that is in the Bambu Studio program presets, you will get an error on your printer that says something along the lines of “error: tried to print outside of area”.
I changed the starting G-Code so that the starting line starts correctly on the buildplate and doesn't collide with the buildplate brackets.
HOW IT WORKS:
- drag the .3mf file into Bambu Studio
- save the printer profile
- save the filament profile (Bambu Studio normally works with 1.75mm filament and Ultimakers work with 2.85mm filament)
Happy printing!