Wyniki wyszukiwania: ultimaker

Ultimaker clip

Ultimaker S3 Spool Holder

Ultimaker S3 Spool Holder for generic filament. Design to be printed without support. No tool required. Clips on the Ultimaker s3. Design to be used with extra bowden on the feeding block (step motor block).

UltiMaker 2 series OrcaSlicer profiles

update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed

UltiMaker 3 & S series profiles for OrcaSlicer

After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…

Easy Ultimaker 1, 2, 2+ – 30x30 Blower Fan Upgrade V2.3 (No Support, Bolt-On Design)

This is a great modification for the Ultimaker 2, 2+ that replaces the stock fans with quieter, more efficient 30x30 blower fans. The upgrade improves airflow direction and enhances print quality—especially when printing overhangs or…

1.75mm Extruder/Feeder upgrade for Ultimaker 2, 2+, 2+ Connect 3

This is the Extruder/Feeder from the Ultimaker 2+, which I’ve reinforced and slightly modified. The extruder housing has been upgraded by removing the original arm axle and replacing it with a threaded hole for an M5 countersunk bolt.…

1.75mm Duel XY Printer Carrier Hat for Ultimaker 2, 2+, 2+ Connect

Just a quick and simple replacement carrier hat to enable 1 extra bowden tube and smaller holes for the choice of using threaded or non threaded tube camps for 4mm bowden tubes. Enjoy Category: 3D Printer Parts

MonoBlock v3.12 & v3.15 (6MM & 8MM Axis) for Ultimaker 1, 2, 2+, GO, Connect, Extended

MonoBlock v3.12 (6MM & 8MM) axis This block will not only enable you to convert your standard Ultimaker print head from 2.85mm filament to 1.75mm filament, but will also enable structural integrity and rigidity for higher quality prints.…

Ultimaker 2-3 Extruder Lever Arm - Screw Together Upgrade

My Ultimaker 2+ started jamming a ton and I discovered that the extruder lever had warped at the bearing mounting point causing it to bind. Using the UM open source files I modded the lever arm to assemble with screws - making everything…

Ultimaker 3 Front Mount Filament Guide

I was frustrated by how the Ultimaker 3 stock filament guide works, especially with wider spools which jam up. This front mounting filament guide is remixed off the original Ultimaker part:…

Ultimaker S3 (or S5) spool holder for wider spools

This is a remix of the great Ultimaker S3 spool holder by julien3d.cvm. Made the holder longer for wider spools.

Remix of the part "Printer Mount V2" from "Universal Ultimaker 2 Spool Holder by Undeviljur

Remix of the part "Printer Mount V2" from"Universal Ultimaker 2 Spool Holder by Undeviljur" http://www.thingiverse.com/thing:1546811 Made for a Dagoma Discovery 200 printer, and assembled onto one leg of a 'Lack" IKEA table. Layers 0,2 /…

Ultimaker 2 e3D Mount

Mount an E3D V6 hotend onto your Ultimaker 2 or 2+. Attaches with cable ties (zip ties) and a single screw. Simple. Mounting points for all three fans: 2x original part fans and the E3D heatsink fan. Use the screws you're using now (The…

strengthening the bed Ultimaker S3

bed reinforcement for ultimaker s3.

Ultimaker 2 Aluminum Extrusion Print Table Back Cover

Slightly modified UM2 Print Table Back Cover with added "ae" for Ultimaker 2 Aluminum Extrusion Clone.

Ultimaker 2 clone base plate - MK2b ready

This is my adaptation of Ultimaker bed plate for MK2b heater. I've made 2 versions: One is based on original design for Ultimaker 2 heater with added mounting holes for MK2b heater. Second version is designed for my custom heater plate .…

Ultimaker2E3DV6andSherpaMini

Ultimaker2をSherpa Mini(Sherpa Heavyでもok)を使ってdirect extruderにしました

Ultimaker 2 Upgraded Knob (for better grip and speed turning)

The same as the Original knob except with a dowel sticking out the end like that of a CNC machine for quicker turning

Orbiter for Ultimaker

Upgrades your old Ultimaker Original to direct drive using an Orbiter extruder. I use the 2.85mm version since I am also using a second printer from Ultimaker and want to use the same filament rolls for both. With this upgrade I can print…

Bambu Studio profile for Ultimaker 2+

The reason why I did this is because normally if you add the Ultimaker 2 Extended + to Ultimaker Cura, it won't let you adjust the settings for retraction that are most important (retraction speed and retraction distance). Normally when…

Raspberry Pi Kamerahalterung Ultimaker MK2

passend für: Raspberry Pi Kamera Amazon : B07VSLZJCX Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: Other

Ultimaker-Fuß Halterung MK1

passend für: Ultimaker 2+ Category: Parts

Halterung Ultimaker Netzteil MK1

Passend für das Netzteil vom Ultimaker 2+ Category: 3D Printer Accessories

Raspberry Pi Kamera Halterung Ultimaker MK1

Passend für Raspberry Pi NoIR Category: 3D Printing

Mini Cabinet for Cederb's Rack for Ultimaker cores

Cores Cabinet uses 2.85 filament as hinge pin.

Ultimaker S3 Spool Holder

Ultimaker S3 Spool Holder for generic filament. Design to be printed without support. No tool required. Clips on the Ultimaker s3. Design to be used with extra bowden on the feeding block (step motor block).

Ultimaker 2 replacement part for part cooling airduct

this part is designed so that it can be inserted in the cavity of the metal fan shroud, using the original screws. It's for when one (or both) of the metal flaps are broken off due to metal fatigue and you don't want to replace the entire…

Filler sidemount for Ultimaker 2+

Simple mount for the ultimaker 2+. Unlike the normal mount, this can be used to install the "Filler" on the side of the ultimaker2+ enclosure.

Ultimaker 2+ Connect Tools Holder

Preview: https://a360.co/3zdecfp

UltiMaker 2 series OrcaSlicer profiles

update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed

UltiMaker 3 & S series profiles for OrcaSlicer

After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…

Ultimaker 2+ Connect Feet

Preview: https://a360.co/3HtEVHr

Ultimaker 2 and 3 tension indicator

somehow the original part that holds the tension of the extruder module of the UltiMaker broke off at the indicator pin. This pin is there for another reason: to hold the nut in place so it doesn't pivot. I designed a replacement part…

Gyro the Dodo - Ultimaker Special and Display Stand

“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…

Ultimaker S3 tool holder (including print cores)

The model can be printed in 2 parts without supports, and mounted to the left side of the ultimaker 3S using the already present screws for the front door hinge. Once mounted the print core can be clicked in and out using the same…

Filament Clip for Ultimaker Spools

Preview: https://a360.co/3r8g7y6

Ultimaker 3 Spool Holder

Love your Ultimaker 3 but hate the poorly designed spool holder it came with? Then give this re-engineered spool holder a try! Link to the source files can be found under the "Design Files" heading. WARNINGS: 1) Be sure to read "Print…

Ultimaker 2 Replacement Knob

A new knob for the Ultimaker 2 which provides a better grip. Based on Ultimaker 2 Knob . I redesinged fillets a bit and made it a little smaller in diameter because original design turned out to turn a bit strong, at least in my Ultimaker…

Ultimaker 2 Replacement Print Head V1.1

This is a print head for the Ultimaker 2. I created it after my second original print head got cracks. It is a drop in replacement, you can use stock bearings. The cables are fixed on the outside and the outer part is desinged to be…

Ultimaker 2/2+ Sliding Block with Belt Tensioning Mechanism

v2 out now! Click here to acces the page. IMPORTANT! YOU NEED 4 STANDARD M3 NUTS AND 4pcs of M3x12 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. Tensioning Animation Tutorial: PROS…

[v2] Ultimaker 2/2+ Sliding Block with Belt Tensioning Mechanism

IMPORTANT! YOU NEED 4 STANDARD M3 NUTS AND 4pcs of M3x12 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. Tensioning Animation Tutorial: PROS AND CONS ORIGINAL DESIGN TENSIONER DESIGN…

[ULTIMAKER 2/2+] 40mm Dual Standard Fan Mount [FOR DIRECT DRIVE UPGRADE]

[AIRFLOW OPTIMIZED] Ultimaker 2/2+ Direct Drive Upgrade alternative fan duct design for standard fans instead of the blower ones.

[ULTIMAKER 2/2+] Left Side Filament Holder

Description IMPORTANT! YOU NEED 2 224714 BEARINGS and M3 NUTS AND 4pcs of M3x40 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. ULTIMAKER 2/2+ Left Side Filament Holder Assembly…

Ultimaker Original + Spool Holder

This is a simple spool holder designed to be mounted on the Ultimaker Original and Original + reel holder mounting plate located on the back panel. If your slicer of choice has a bridging detection feature, this model does not require…

Ultimaker Original + Standoffs / Feet

Snap on these standoffs (or feet) to your Ultimaker to help keep your work surface and printer safe from scratches. They also provide enough height to mount the power supply to the bottom of the machine, reducing its overall footprint…

Ultimaker Original - Hotend LED Light

Used generic “5050” 24v LED strip Hence Ultimaker Original is 19v 24v LED light is bright enough and not generating too much heat so part can be printed in PLA

Giant Ultimaker Robot for Vacuum Forming

This Thing is an Ultimaker Robot which I scaled up to 200 mm tall by 220 mm wide. I printed him in halves so that the parts could be bucks for a vacuum forming machine. The photos show the robot halves together and then on the vacuum…

E3D Revo Micro mount for Ultimaker Original - Return Of The Kraken

E3D Revo Micro mount for Ultimaker Original - Return Of The Kraken Hardware required: 1. Up to 4x Revo Micro hotends (more than 2x will require board upgrade or additional MCU like RAMPS if using Klipper firmware) 2. Same ammount of…

RepRap Smart Controller 2004 LCD Mount to slide on 6mm Plywood Ultimaker Original UMO

Remix of https://www.thingiverse.com/thing:599562 Original design was for so called Full Graphics LCD aka 12864 but I had to adopt it for classic 2004 LCD so called Smart Controller Through hole for the screwdriver (hex alien key) was…

Ultimaker side extruder bracket

This is a bracket to attach your extruder on the side of the ultimaker instead of the back. You will still be able to attach it behind as it was before. It is also a bit flexible, greatly reducing the extruder noise You will need to drill…

Spool holder for Ultimaker Original and Original+

A replacement spool holder for Ultimaker Original (and plus). A plate protects the cable loom from rubbing against the rotating spool. After printing, connect the parts with four M4 screws. I printed it in brown PLA to match the wooden…

Ultimaker 2 Extruder Mount for Ultimaker Original

You will need a part like this if you want to use the Ultimaker 2 Extruder Upgrade Kit on an Ultimaker Original. Category: 3D Printer Parts

Bondtech QR - Ultimaker 3 Holder - Accante Cover friendly

When you have a Bondtech QR and buying an Accante Cover you will determine, it will not pass with the outlets. With this holder you can pack the new Extruder on a better position to use with the cover. No need to glue or drill holes for…

Alternative 1.75mm toolhead for Ultimaker

As requested: the parts I made for my Ultimaker Original+ Holder for Voron M4 extruder, fits original Feeder slots Lower frame: top needs 4 M3 melt-in threaded inserts. All other parts mount to it, screws go in directly. Upper frame:…

Ultimaker 2/2+ FRONT DOOR

Material needed: Photoframe with 2mm glass and plastic frame (mine was bought in Pepco) 2x M3x40 2x nut M3 neodym magnet dia5x3mm 1x M3 magnetic screw replacing the stainless steel one in the frame of UM2

Easy Ultimaker 1, 2, 2+ – 30x30 Blower Fan Upgrade V2.3 (No Support, Bolt-On Design)

This is a great modification for the Ultimaker 2, 2+ that replaces the stock fans with quieter, more efficient 30x30 blower fans. The upgrade improves airflow direction and enhances print quality—especially when printing overhangs or…

1.75mm Extruder/Feeder upgrade for Ultimaker 2, 2+, 2+ Connect 3

This is the Extruder/Feeder from the Ultimaker 2+, which I’ve reinforced and slightly modified. The extruder housing has been upgraded by removing the original arm axle and replacing it with a threaded hole for an M5 countersunk bolt.…

1.75mm Duel XY Printer Carrier Hat for Ultimaker 2, 2+, 2+ Connect

Just a quick and simple replacement carrier hat to enable 1 extra bowden tube and smaller holes for the choice of using threaded or non threaded tube camps for 4mm bowden tubes. Enjoy Category: 3D Printer Parts

Ultimaker Calibration Block (Print head alignment aid)

A simple yet effective tool for the proper clamping force on your print head. Very Clear instructions here on how to use it. https://support.makerbot.com/s/article/1667411012998 Compatible met: UltiMaker 2+ Connect UltiMaker 2+ UltiMaker…

MONOBLOCK v2.12 1.75mm duel conversion for Ultimaker 1, 2, 2+, connect extended

Monoblock for Ultimaker 1, 2, 2+ This block will not only enable you to convert your standard Ultimaker print head from 2.85mm filament to 1.75mm filament, but will also enable structural integrity and rigidity for higher quality prints.…

Ultimaker 2 XY Bushing Slider Block Guide (2 Piece) 6mm

This is a redesigned XY slider guide block for the Ultimaker 2, engineered for ease of use and reusability. The new design features a two-part assembly secured with a single bolt, allowing for quick disassembly and maintenance without…

Easy Ultimaker 1, 2, 2+ – 30x30 Blower Fan Upgrade (No Support, Bolt-On Design)

This is a great modification for the Ultimaker 2+ that replaces the stock fans with quieter, more efficient 30x30 blower fans. The upgrade improves airflow direction and enhances print quality—especially when printing overhangs or…

MonoBlock v3.12 & v3.15 (6MM & 8MM Axis) for Ultimaker 1, 2, 2+, GO, Connect, Extended

MonoBlock v3.12 (6MM & 8MM) axis This block will not only enable you to convert your standard Ultimaker print head from 2.85mm filament to 1.75mm filament, but will also enable structural integrity and rigidity for higher quality prints.…

Proto-Matic Extruder - Ultimaker 2 "resto-mod"

Lets you use a v6 hotend on your ultimaker along with optional LDO orbiter mounting and BL/3D/CRtouch/cartographer mount support. The model has not actually been tested on an ultimaker yet so I cannot 100% confirm anything yet, however I…

Ultimaker 3 Printcore Rack

Print on it's back. Simply remove one of the top screws on either side panel to mount. I derived this from Erik's wonderful design, but I only have three print cores total so six slots was more than I needed. I simply edited the STL by…

Ultimaker 2/2+ active stepper cooling - fan holder

Two 40mm holes have to be made to the rear panel - to the bottom part of the “chimneys” for stepper motors. Fans blows the air up and cools the steppers. Material needed: 2x fan 5010 24VDC 2x fan grill 40mm 1x DC controller with feedback…

Compact direct extruder for Ultimaker 2 Plastmaska

Компактный директ экструдер для самосборного принтера Ultimaker 2 с крепление под датчик adxl345 и под хотенд от Bambulab X1 В качестве механизма подачи использованы детали от BMG экструдера

Ultimaker 2 + Door Front Panel (No Modifications Needed)

I designed and built this simple door for my Ultimaker 2+ to help with printing materials that are sensitive to cool air, cold temperatures, or drafts. The best part of this design is that you don’t need to cut, saw, or drill anything on…

Even Larger Spool Holder for Ultimaker 3

Edited for even larger spools - up to 105mm wide. This includes the 2.3kg and 2.6kg spools used by manu manufacturers, which are 100-102mm wide. Category: 3D Printer Parts

Vertikal power suply holder for Ultimaker 2+

.. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: 0.1-0.2 Infill: 20% Category: 3D Printer Accessories

Ultimaker 2-3 Extruder Lever Arm - Screw Together Upgrade

My Ultimaker 2+ started jamming a ton and I discovered that the extruder lever had warped at the bearing mounting point causing it to bind. Using the UM open source files I modded the lever arm to assemble with screws - making everything…

Ultimaker 3 Front Mount Filament Guide

I was frustrated by how the Ultimaker 3 stock filament guide works, especially with wider spools which jam up. This front mounting filament guide is remixed off the original Ultimaker part:…

Ultimaker 2+ Anti Vibration Feet

These feet I designed will allow you to use Bambulab P1S antivibration rubber feet which will aid in ghosty prints. Please share your prints as I really do enjoy seeing them.

Ultimaker S3 (or S5) spool holder for wider spools

This is a remix of the great Ultimaker S3 spool holder by julien3d.cvm. Made the holder longer for wider spools.

Ultimaker extruder damper

Put this thing between the extruder and the frame. It will dampen some of the retraction noise. If you put something soft under the lower support, it is even more effective. Category: 3D Printer Accessories

Ultimaker Original sound damping foot

A small sound damping foot for the Ultimaker Original and Original+. Probably fits UM2 too. Prints fast, uses little material. Instructions Designed in FreeCAD. Cleaned up in Meshmixer. Printed on an UMO+ in PLA with 0.25mm layers. Put it…

Ultimaker Logo

3D printable Ultimaker logo. This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift. Category: Signs & Logos

Ultimaker 2+(extended) - tall feet to fit electronics under printer + AC power switch mount

This is part of my project to upgrade my old Ultimaker 2 Extended+. This part consists of taller feet that increase the clearance underneath the printer, providing enough space for the electronics and allowing an AC power switch to be…

Lubi Boy - rod lubrication & cleaning (Ultimaker, Prusa)

The Lubi Boy is helping to do the maintenance on the rods of 3D printers (e.g. Ultimaker (S5, S3, 2+), Prusa (MK2, MK3, Mini, Mini+). It is possible to use it to apply lubrication to the rods easily and remove dust or dirt from them.…

Ultimaker Style Bowden Clip

This is a quick and easy printable clip designed to hold the bowden tube of your Ultimaker in place. After inserting the tube into the fitting, pull it up and put the printed clip underneath the collet to secure the tube in place.

Compact Bowden Extruder adjusted for Tatsu drive gear and ultimaker frame

I love the compact bowden extruder, but as always, I needed it slightly different for my application. My changes include: slightly farther out idler, to accomodate tatsu drive gear slightly different idler shape, so it fits ultimaker…

Yet Another Diamond Hot End Mount for Ultimaker

I was not satisfied with existing ultimaker hot end mounts because I wanted a mount where the nozzle was easily removable and that only used two LM6UU bearings just like the normal ultimaker hot end mount. I also wanted space to mount two…

Ultimaker Retracting Z-Probe

UPDATE 2 Designed a folding post so your print area should be only minimally effected by this add-on. Moving the bed to the bottom deploys the post and after using the post to deploy and retract the probe, you can retract the post by…

Panelmax for Ultimaker

I wanted a control panel for my ultimaker but I didn't want to buy the horrendously overpriced official version, so I made this! Instructions I used this screen (20x4 lcd w/ backlight) ( http://tinyurl.com/arrztln ) and this encoder (…

Ultimaker 2/2+ FAN Upgrade.

Ultimaker 2/2+ FAN Upgrade.

Ultimaker 2 - E3D hotend mount

This is my design of a mount for an E3D v6 hotend for an ultimaker. the cooling fans is 2 40x10 mm blower fans bought from aliexpress the fan brace nay not be needed. (the extra holes is for a bed leveling sensor at some day) Print…

Custom parts for Ultimaker 2 extrusion 3dprinter - Ulti-Alu-Maker

This is a collection of all the custom parts for my ultimaker 2 extrusion 3dprinter feel free to use any parts you like. The fuse holder is this http://www.thingiverse.com/thing:1057190 where i just made a 202 mount part handle is wider…

Ultimaker Lego Robot Remix

This is quite large compared with the original benchmark robot. It is scaled and then stretched front to back so that it can sit on a Lego compatible base (3X3 Lego studs). This prints fairly quickly and is a good size to fit in a child's…

Lerdge LCD screen case-Ultimaker 2

Designed a case for the screen that comes with the Lerdge 32 bit controller for use on an Ultimaker 2 clone. Case is wide enough to cover the standard Ultimaker case cutouts Reference info > http://www.lerdge.com/ Category: 3D Printer…

Ultimaker S5 Longer Spool Holder

I don't always necessarily use the Ultimaker brand filament with the S5. I designed this model because bigger 1kg spools from other brands don't always fit on the provided spool holder (especially when doing dual extrusion prints). It…

Ultimaker 2 SKR 1.4 Raspberry Pi retrofit case without drilling

Marlin 2.x is not running well anymore on old MEGA2560 boards, so I decided to get my UM2 up and running again with new hardware. This case is made to use the bores of the spool holder in the back so you don't have to drill anything in…

Ultimaker 2 Hotend Fan 30x30mm adapter with mini IR-Sensor leveling sensor

I did this thing quite some time ago but never uploaded it. After i was asked on youtube about the repeatability about my old design i noticed this mistake. The 30mm front fan is based on one of my other designs:…

Ultimaker 2 Feeder Holder top mount

External UM2 feeder with holder for the Ultimaker 2 case. They mount ontop of the UM2 and reduces the lenght of the bowden tube around 30% which might make it easyer to print flexible materials. To mount it you have to replace the…

Ultimaker 2 Belt Tensioner

Yet another belt tensioner for Ultimaker 2 Category: 3D Printer Accessories

Auto bed-level for Ultimaker 2 with original Head

This solution uses a really cheap touch sensor for $0.13 as bed level sensor integrated on the free hole of the second Nozzle. I'll had some calibration "issues" with my Ultimaker 2 extended (clone). I'd had to repeat the calibration…

Ultimaker 2 blind plate for OLED SDCard and Knob

I removed the whole front unit of my Ultimaker 2 because of switching to Repetier firmware. Category: 3D Printer Accessories

Ultimaker 2 Feeder Holder with anti-vibration flex parts

External UM2 feeder holder with anti-vibration parts. Easy printable without dual-nozzle setup. Category: 3D Printer Accessories

Ultimaker 2 Feeder Holder integradted anti-vibration

Made for dual print with flexible filament. The inner part should be flexible. Category: 3D Printer Accessories

Ultimaker 2 Hotend Fan 30x30mm adapter

I did not have a replacement for the 25x25mm fan so i made a adapter for an 30x30mm 24VDC fan. The small plug i used to close the tube hole for the second nozzle. For me shrinking it down to 97% was fitting best. For the lower hole i just…

Raspberry Pi Ultimaker 2 case camera holder

Camera holder for this Project Camera: Aliexpress Video: YouTube Category: 3D Printer Accessories