1 / 2
ultimaker 2 e3d mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount can be used to mount any e3d v6 style hotend.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (18)Powiązane
Parts needed:
One - Screw M3x10 : to fasten cable clip to mount
One - Screw M3x35 : To fasten hotend to mount
One - Threaded insert M3x4 : For M3x35 screw can have better grip
Four - Grub screw M3x4 : To tighten bearings to mount
Four - Screw M2/M2.5x8 : To fasten blower fans to mount
Two - Blower Fans 3010 : for part cooling
One - Fan 3010: To keep heat sink cool
Additional notes:
- Use button head M3 screws
- I just used PLA with no issues even printing at 250C
- To get full printing area you will have to angle y endstop back
- TODO: add picture
- Used 2.85 heatsink and titanium heatbreak
- https://www.matterhackers.com/store/l/e3d-v6-heat-sink-3.00mm-with-bowden/sk/M7D3E128
- https://www.matterhackers.com/store/l/e3d-v6-titanium-heat-break/sk/MX1YSTJ6
- This was designed to use CHC hotend
- https://trianglelab.net/products/chc-kit-ntc-100k-b3950-thermistor?VariantsId=10311
- And one handed nozzle change
- If you want a longer melt zone use volcano (or volcano CHT) nozzle with extender
- Using CHC Pro with 115 watts on ultimaker 2 will cause power resets
- Unless you pre-heat nozzle to 100C before starting to heat bed
- Will have to look in to chcb support: