1 / 2
ultimaker 2 e3d mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount can be used to mount any e3d v6 style hotend.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 99
- Makes
- 0
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts needed:
One - Screw M3x10 : to fasten cable clip to mount
One - Screw M3x35 : To fasten hotend to mount
One - Threaded insert M3x4 : For M3x35 screw can have better grip
Four - Grub screw M3x4 : To tighten bearings to mount
Four - Screw M2/M2.5x8 : To fasten blower fans to mount
Two - Blower Fans 3010 : for part cooling
One - Fan 3010: To keep heat sink cool
Additional notes:
- Use button head M3 screws
- I just used PLA with no issues even printing at 250C
- To get full printing area you will have to angle y endstop back
- TODO: add picture
- Used 2.85 heatsink and titanium heatbreak
- https://www.matterhackers.com/store/l/e3d-v6-heat-sink-3.00mm-with-bowden/sk/M7D3E128
- https://www.matterhackers.com/store/l/e3d-v6-titanium-heat-break/sk/MX1YSTJ6
- This was designed to use CHC hotend
- https://trianglelab.net/products/chc-kit-ntc-100k-b3950-thermistor?VariantsId=10311
- And one handed nozzle change
- If you want a longer melt zone use volcano (or volcano CHT) nozzle with extender
- Using CHC Pro with 115 watts on ultimaker 2 will cause power resets
- Unless you pre-heat nozzle to 100C before starting to heat bed
- Will have to look in to chcb support: