Ultimaker 2 e3D V6 Adapter with Radial Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E3D V6 hotend on an Ultimaker 2. Uses radial fans for improved part cooling.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll want to print this in ABS or PETG or some other high-temp material. It's also a good idea to cover the inside of the shroud with aluminium tape or foil to help reflect some of the heat.
I used M2 screws to attach the radial fans, and the standard e3d screws for the heatbreak fan.
The radial fans came from here: https://www.aliexpress.com/item/5pcs-lot-Gdstime-DC-12V-3cm-30mm-x-10mm-Ball-Brushless-Cooling-Fan-Air-Blower-Blow/32844290749.html - I asked for 24v fans in the comment section of my order, and that's what they sent me. Nice!
You'll also need a longish M3 screw to clamp the new hotend in place. I can't remember what length mine was, sorry!