Ultimaker 2 e3D V6 Adapter with Radial Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E3D V6 hotend on an Ultimaker 2. Uses radial fans for improved part cooling.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 145
- Makes
- 1
- Views
- 1,267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll want to print this in ABS or PETG or some other high-temp material. It's also a good idea to cover the inside of the shroud with aluminium tape or foil to help reflect some of the heat.
I used M2 screws to attach the radial fans, and the standard e3d screws for the heatbreak fan.
The radial fans came from here: https://www.aliexpress.com/item/5pcs-lot-Gdstime-DC-12V-3cm-30mm-x-10mm-Ball-Brushless-Cooling-Fan-Air-Blower-Blow/32844290749.html - I asked for 24v fans in the comment section of my order, and that's what they sent me. Nice!
You'll also need a longish M3 screw to clamp the new hotend in place. I can't remember what length mine was, sorry!