Ultimaker 2 flat feet (anti-vibration)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat feet to put under Ultimaker 2 to reduce noise. These feet provide a flat surface that is then easier to soften to…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 82
- Wydruki
- 5
- Wyświetlenia
- 372
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Flat feet to put under Ultimaker 2 to reduce noise.
These feet provide a flat surface that is then easier to soften to isolate vibrations.
I used some 3M "Multi Purpose Sealing and Insulation Tape" under the feet for soft cushioning.
Also printing the feet from Ninjaflex or some similar material might work, but I didn't have any.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20%
Notes:
More or less default settings. Some leftover Ultimaker PLA.
Category: 3D Printer Accessories