Lengx Extended Butt Plate with Cutouts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Watch the original build video: https://youtu.be/jKdu9TzRMRw
Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill them in with another color. 20 minutes in TinkerCAD later, I had what I needed.
I used my slicer to scale the cutouts down by 1%. I used some 220 grit to smooth them out a bit so they could slide in easier. I secured them in place with a little Gorilla Glue.
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament: Fillamentum PLA Vertigo Jade
Notes:
WHEN YOU PRINT THE CUTOUTS, SCALE THEM DOWN BY 1% IN YOUR SLICER
Category: Sport & Outdoors