Lengx Extended Butt Plate with Cutouts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 1
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Watch the original build video: https://youtu.be/jKdu9TzRMRw
Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill them in with another color. 20 minutes in TinkerCAD later, I had what I needed.
I used my slicer to scale the cutouts down by 1%. I used some 220 grit to smooth them out a bit so they could slide in easier. I secured them in place with a little Gorilla Glue.
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament: Fillamentum PLA Vertigo Jade
Notes:
WHEN YOU PRINT THE CUTOUTS, SCALE THEM DOWN BY 1% IN YOUR SLICER
Category: Sport & Outdoors