1 / 20
Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder with eject button — zdjęcie 1
1 / 20

Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder with eject button

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made modular build plate holder. Easy to print and mount horizontal or vertical.

Ocena
4,75 / 5
Polubienia
449
Pobrania
940
Wydruki
15
Wyświetlenia
7752
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Big update:

New, Simple Version of The FNT Plates storage for Prusa MK3/4/Core One has been released.

You can find it here.  

Hi,

A have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to create plates holder with eject button for easy insertion and removal.

It is without complicated extraction. There is no danger of the printing surface getting dirty from greasy fingers :-)

By pressing the button, the build playe ejects approximately 3 cm. By inserting the build plate, the button will pop out easily.

 

You can choose from several options:

  • for Prusa's MK3/MK4 build plates

  • for Bambu X1/P1 build plates

 

Size:

  • for 1 build plate

  • for 2 build plates

  • for 4 build plates

  • for 6 build plates

 

Buttons:

  • With big or small eject buttons

  • Without eject buttons body

  • Reversed version of buttons

Assembly:

  1. print Holder body (Left+Right), buttons and arms

  2. Insert button to the holder

  3. push the arm into the holder firmly

  4. mount holder using 3mm/4mm screws

Printing instructions:

PLA / PETG is OK

3 perimeters, 20 % infill, no supports

Body print orientation:

 

 

 

Tagi