Cabinet vents 60mm Fan and Rectangular vent, slanted to prevent rain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed vents for my power and networks box for my outside cameras as the equipment got to hot in the waterproof sealed…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Needed vents for my power and networks box for my outside cameras as the equipment got to hot in the waterproof sealed boxes. Made the fan cover and rectangular vent with slanted fins to still keep water out. The first design with thin fins was to thin for the 0.8mm nozzle that I currently have on my 3d printer so I made the second fan cover and the rectangular vent with thicker fins. I quickly glued the vents on and sprayed it, can be done nicer if you take your time.
Note 1 :Check the directions of the vents so that rain do not run into your cabinet
Note 2:don't use bolts and nuts to secure the vent if the lid of the cabinet slide on.
Note 3:The fan vent with thin fins can't be printed with a 0.8mm nozzle so I did not test that print, if it give problems or is to thin please let me know and I will remove it.
Print Settings
Printer:
P3 Steel
Rafts:
No
No
Filament: ROHS PETG
Notes:
used a 0.8 mmm nozzle
Category: Electronics