Desiccant Drying Baskets for Sunlu Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're like me you have collected a big bag of desiccant packets. I have dried a few of them at a time in my Sunlu…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
If you're like me you have collected a big bag of desiccant packets. I have dried a few of them at a time in my Sunlu S1 drier, but wanted a basket, that fit in the drier, to hold a pile of them. This download has 2 baskets. A smaller one that fits into the bottom of the drier. If you need more room there is a bigger basket that fits on top of the smaller one. To dry, set the temp to the max and dry the packet overnight. The baskets have large holes all around for good air flow. These baskets could also be used in your 3D printed by setting them on the build plate and set the build plate temperature to 60 or 65 degrees C.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
No
0.20mm
Infill:
15%
Notes:
Print with baskets upright - no supports needed.
Category: 3D Printer Accessories