Pivoting Enclosure for ZEEWEII-154Pro Oscilloscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing on the bench. The extra parts needed are four M2.5-5 or M2.5-6 screws to replace the four screws on the back. These back screws need to be changed as the originals are to short when attaching the printed back and top-sides pieces. Also you need a 1/4" x 1" or 1/4" x 3/4" hex head bolt and nut, to attach the pivoting base.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
0.12
Infill:
20%
Notes:
The base can be printed with no supports or brims or rafts.
The back piece was printed a brim and tree supports.
The tope-sides pies was a brim.
Hatchbox Matte Black PLA prints best at 215 degree.
Category: Electronics