Pivoting Enclosure for ZEEWEII-154Pro Oscilloscope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing on the bench. The extra parts needed are four M2.5-5 or M2.5-6 screws to replace the four screws on the back. These back screws need to be changed as the originals are to short when attaching the printed back and top-sides pieces. Also you need a 1/4" x 1" or 1/4" x 3/4" hex head bolt and nut, to attach the pivoting base.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
0.12
Infill:
20%
Notes:
The base can be printed with no supports or brims or rafts.
The back piece was printed a brim and tree supports.
The tope-sides pies was a brim.
Hatchbox Matte Black PLA prints best at 215 degree.
Category: Electronics