Counting matching models…
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
This is a remix of the following 3 projects that all contributed to creating what I needed: https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount : this gave me the wall support part + the sliding insertion mechanism,…
Edit 2026-01-19: V3 with rotation feature. I've created a model of which you can rotate based per seat inclination. You can reuse an GoPro M5 thumb screw and a M5 nut to tighten the assembly. V2 model has a fixed angle. both models slide…
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
A tidy station for the puffco Pivot and accessories. Features Include: Pivot Holder hotknife or tool holder Q-tip storage PEARL STORAGE and of course a spot to keep your concentrates
I have some LED channels that I use in the yard for Halloween decorations and I wanted to mount them so that I could fix the angle that they were pointing. I designed these mounts to be used in the yard (with the spike) or on a flat level…
Works best in PETG; I made it with 0.6 nozzle @255°C, 0.2mm height, bed 85°C
I wanted to be able to change the pivot/spin direction of my Honeywell Turboforce HT-900 fan after it was mount on the wall. Between this spin and the normal tilt of the original fan, I can point the airflow in almost any direction. I…
Launch rod pivot assembly for the Vintage Model Rocket Launch Pad design. Separate files for base, pivot bar, and cap. The pivot bar is stronger when printed vertically with support for the launch rod port. The port was designed such that…
The silent box for Puffco Pivot, titanium tool edition. The modern version of the silk lined sigar case. It is print in place. I printed all these boxes in July 25, the box that contains my Pivot in the Reddit video, have been in use…
Boom arm pivot replacement for the same PYLE stand in my tripod junction model. The boom pivot assembly on the OEM stand is a light gauge stamped sheet metal part which cannot apply sufficient pressure on the mount, and thus slips and…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
Broke my headstrap pivot and I couldn't find another for sale. This works great. I suggest printing with PETG and turning your temperature up about 10 degrees to ensure better layer adhesion. Be careful placing the part as too much force…
This replacement latch uses an M3 bolt, nut, and washer to serve as a more reliable pivot rod. The OEM latch uses two small plastic nubs that flex and click into place, which consequently makes them fail over time.
1/4" x 1" hex bolt with washers and locking nuts are used to attach the piviot to the frame. M4 x 10m screws are used to attached the mount to the cord holder. Printed in PETG on a Core 1 L.
This little fender design (printed in PLA) has been valiantly defending my lower pivot from muck and rocks for the last 2 years. Attaches with 1x ziptie, has a rib/cutout to fit to weld, but not required & should work lower down or on a…
I bought a PT Cruiser and the handle that pivots the back seat was broken. I actually planned on using this feature a lot , so I made a new handle. No, it doesn't look as nice as the original, but it does work. I've printed mine in ASA,…
[PL] Zgubiłeś lub zniszczyłeś plastikową podkładkę między trzpieniem a uchwytem ramienia napędu bramy Nice? Ten mały element to tuleja ślizgowa, która zapobiega tarciu metalu o metal i zapewnia płynny ruch obrotowy podczas otwierania…
The thin steel pivot bar eventually rusted out on our drinking bird, so I made a simple replacement that can be 3D printed. It works fine, and can add a bit of colour, too! Pretty much any filament should work fine, as it's not under much…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
More designs for building with 2020 extrusion A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I designed it for introducing odd angles into 2020…
Base for desk lamp pivot, especially for old office lamps where the base has broken. Measures: -Base 5cm X 4.5cm -Base width 7 mm -Total height 4.7 cm -Hole width for the lamp pin is 1.5 cm -Hole for passage of 7 mm iron rod…
A replacement part for doorbells or mailboxes that have a pivoting nameplate
A rear diffuser and suspension link for the TC4 touring car. I made this in 2 parts so that each component could be modified and adjusted individually (make a body mount on the upper half later) this is lengthened so that it looks decent…
1 Clothesline pivot needs 1 Thread lock. done in .2mm layer height. .4 nozzle
Print with a few extra walls for strength. Requires supports.
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing…
This enclosure is for a standard 20x4 line LCD. It pivots on a small base intended to be mounted, with 2 screws, to another surface. No standoffs are required. The 4 screws (M3x20) in the back hold the LCD in place. The enclosure is…
A modular holder-system for the Sauter pivotable body clamp adapters The system can be infinitely expanded to hold all the adapters you own. The individual holders are connected with small bowties to align them. Two screwholes with a…
A pivoting holder for 120mm Axial fans. Fits snuggly on 16mm grow tent poles. Uses 2x M3x15mm bolts and 2x M3 nuts Once you adjust the tightness on the holder, it will stay in place. With just enough torqon the bolts, you can pivot the…
A friend bought a wowgo 3e and within a few days the front pivot cup had all but disintegrated, and the rear wasn't far behind. I took a few measurements and whipped this up, printed it in TPU and it's been solid since (been a few months…
I printed with supports. The angled model has more layer integrity, while the flat model was better for printing with a color change. Printed in PLA because that was the only blue on hand. Not the right color anyhow, so still draft mode.…
This tool allows to disassemble and assemble Brembo brake levers with a press fitted pivot sleeve (12 mm outer diameter). I was not ready to use a hammer on those shiny levers :) , so I designed a simpler version of the Triumph T3880636…
For the bracket, i have used 20% filament, and for the sensor mount, 70% with 45% angle to be more durable. You will need two M3 hex nuts, two M3x8 screws, and one 608 bearing.
A printable replacement clip for Napoleon part number N160-0022. Mine broke, so I decided to save a couple bucks and print a replacement. I wouldn't recommend PLA for this since the door gets hot enough to soften that material, I used ASA…
Trimui Model S / Powkiddy A66 cap to enhance your d-pad experience ! If you are used to Gameboy and other similar "rolling" d-pad device, you may have notice false inputs using this device as the d-pad lay on a all-flexible support and…
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
What could possibly be better than a scratcher with a pivoting head ?…a scratcher with 3 pivoting heads, of course! This model is similar to my previous pivoting head design, but 3 times more satisfying. Design Features: Print-in-place…
This is a remix of the following 3 projects that all contributed to creating what I needed: https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount : this gave me the wall support part + the sliding insertion mechanism,…
Connecting piece to hang the high low bar to the table.
The Steelcase Amia/Leap v2/Think armrests have a tendency for the plastic cover that prevents the 4-way adjustable arms from pinching you to become loose and stop fitting. This happens because the plastic clip pieces will break off from…
Hello 3D printing community. Here is a pivoting arm planter holder I designed to hold my indoor carnivorous plants. I made the retaining loop tapered to accommodate the most common takeout plastic cups from my Chinese food orders.…
The pivot axle for a Wolftooth mountain bike seat post dropper controller. Part can be purchased online, I figured that out after I designed this lol. I printed it at .16 layer height with normal auto supports. Printed in PETG. Fits…
I was asked to replicate a part for a “Stegbar” shower screen door. It doesn't match exact as it was requested to be a little smaller on the cylinder height. But apparently it worked better. 2x versions, second was also requested with a…
Hi, the pin in my Crocs strap (or a similar one, as it was ordered from China) broke. I decided to design this part, trying to stay as close as possible to the original design and its "click!" function. This is not a 1:1 version; I…
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
Gridfinity holders for HexPro hex key and Torx pivot head wrenches. No support material needed. 15% infill.
I needed a rod end for a build I am doing. I didn't have spare rod ends so designed a 3d printed version that has held up extremely well for my application. The pivot ball is print-in-place so you don't need to pop them in. Step file is…
This is the Split Pin to use in hinges and pivots. Using OpenSCAD (if you have not used, it so easy, download it and use it) you can configure the diameter and the length of your Split Pin, and print in PETG. There is also an STL. (length…
I printed mine in PLA with following settings: 0,20 - quality preset 4 Perimeters 5 Massive top and bottom layers and 25% Kubic infill
When dragging my esk8, I've quite often scratched the bashguard on the ground. So I figured instead of damaging the poor metal, I could 3D print something. So… it's a bashguard guard! Supportless print. 2025-09-26: Added v2: Thicker &…
Replacement bushing for the Dalbello Lupo and Krypton boots. This STL contains two separate parts, use the “split into objects” setting in Prusa slicer to separate. Would recommend printing with a impact resistant plastic like ABS or PC.
This is connecting pivot for traffic sign / speed camera from Action. This pivot connect two pipes in one part, when your original pivot was broken and don't wanna use glue you can print this and replace original bolt.
Replacement pivot collars for the Benchmade Mini Adamas (may work for other models with similar pivot collars). Printed using Bambu Lab Bronze PLA. Print in 0.1 layer height. Depending on your printer/settings, you might need to slightly…
The other day I had a little crash on my motorbike and broke the foldable mirror arm. Luckyly, I know how to fix that with my printer, so I made a new part that holds until today. I printed it in PETG, 100% infill. It's necessary to use a…
PIVOT-RAM Adapter: Because Engineering > Admitting Defeat Behold the unsung hero of tablet mounting—the PIVOT-RAM Adapter! This glorious little gadget bridges the gap between your trusty RAM mount and that fancy PIVOT iPad case you…
NAC RLM800 back wheel replacement. Instead of badly working fixed wheel you may have pivot wheel as it should be from the very beginning and 99% of robots have it. Most (not all) of problems disappeared in my mower and its tested dirung…
I love the GearHead Quest 3 Strap but wanted to use it with my older Quest 2 as well. These pivots allow the Quest 2 to be mounted. Pieced together with pieces from the original pivots and a custom mount. The mounts are fairly tight, so…
Summary This is a gloriously over-complicated box for storing cards, or anything else really. As the lid is opened the platform rises, presenting the cards. There are pre-layed-out plates! You can now select from 7 plates to greatly…
Edit 2026-01-19: V3 with rotation feature. I've created a model of which you can rotate based per seat inclination. You can reuse an GoPro M5 thumb screw and a M5 nut to tighten the assembly. V2 model has a fixed angle. both models slide…
i didn't like the viewing angle provided so i cooked this up to help with it, now you should be able to tip the screen your way when using it
Updated! Increased fillet size on cylinder wall Pivot for shower door. Used as an Axam replacement part but looks interchangeable with many of their models. Printed in PETG 0.2mm strength settings on P1S. Used a heated insert which caused…
Arrma 3s rod end with pivot ball built in. Print using supports. Paint on might be necessary use PETG or ABS Note: I have not tested this. Please leave feedback and rate
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
Simple mk3s mount for Pivoting Display model by boothyboothy. Use M3 heat inserts.
Replacement pivot slider for Tortoise by Circuitron slow motion motors. Print instructions Category: Hobby Print Settings Printer: JG Aurora A3 Rafts: No Supports: No Resolution: 0.1mm height Infill: 20%
I could not seem to get the original hinge to print properly. This design utilizes standard filament “rivet” as the pivot axle.
A sturdy yet elegant wall hanger that holds your guitar in style. It is designed to fit electric and steel string guitars and it pivots to fit most necks. Guitars with a wider neck such as classical guitars probably won't fit. For…
At my old place I designed a soap pivot so I don't have to constantly pick up the soap bottle with my hands, which became increasingly difficult when soap was involved, lol. So if a bottle slipped out of your hands while washing dishes…
Bonjour, Pour passer le temps, je ne fais pas de ronds dans l'eau, mais des ronds dans le bois. Ce pivot va vous permettre de faire des ronds de 16 cm de diamètre. Celui se monte à la place du guide de l'affleureuse. Il utilise les deux…
Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…
Longboard / skateboard pivot bushing. Material: TPU ------------------- This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
Bushed version uses the oe brass bushing from OE pivot (remove with a hot blade to slice plastic away). There is a non bushed version as well that should fit over the pin without needing a bushing but it will have more friction than using…
Adaptors to connect your Puffco Pivot to your bong (with a standard 14 mm or 18 mm port). I also added the option between a 65 mm and 50 mm long versions incase your rig needs more clearance. This model is also print in place !
I was asked by a local Auto shop to help with a discontinued part. This bushing is for a GM clutch pedal to replace the spring loaded pivots. No other STLs seemed to be available so I decided to design my first part with CAD. I printed…
This is a filament entrance part I made for my enclosed printer. It allows the filament to enter the top and pivot around around freely without having large open hole. I have two different options for the ball fit for you to choose from.…
I added a rear fender on my trek slash 8 gen 5. After that i started to get rock chips on the pivot. So i made this simple protector in tpu. I used double sided tape to fix it in place but you can use zip ties. It will fit other bikes to.…
Similarly to main pivot fender that Tranisiton sells for their carbon models , I designed a 3D printed one for aluminium model. Snaps on bridge connecting chainstays. Secure with 4 zip-ties. Even if you damage the zip-ties, fender should…
Travel case meant to hold all accessories you may need for your pivot. Magnetic lid for slim design. Used PETG as it was already loaded on the printer. Can hold Puffco Pivot 15ml dropper bottle for Iso 5ml Concentrate Jar Q tips Dab Tool…
This is a pivot-ball-adjustable RC car stand for you to display your prized RC car collection! Overview There are 3 post heights (plus a short non-pivoting post plus a small plinth which is handy for 12th/10th pan-style cars or similar.…
Welcome to the Kit Card Tree Library with the 3UDC pivot mount and information on how to build a display for your kit card or anything else you opt to attach. This project uses parts from several different projects. You will print the…
Replacement pivot cups for PowerDyne Thrust Plates before June 2020 (The ones that are no longer made). These have been used over several months by competetive roller derby skaters and so far proven to be a suitable replacement. There are…
Say AA Pivot! A simple stand for holding the mouthpiece clear when filling your well. Tried to make it as brainfart compatible as possible, enjoy.
I designed this to mount my 7" FEELWORLD 4k Ultrbright field monitor to my tripod and other things. Models include tripod adapter and fork mount for monitor as well as spacers and bearing mount. Side (pivot) thumb screws and tripod mount…
Needed a pivot for my racing simulator rig…I wanted to add a shelf, but needed it to be movable….making it easier to get in and out of rig I printed it with 40% infill and with 4 walls, perimeters, tops, and floors There is also a pin you…
What it is It's labeled as item 5, described as a sleeve in this document for the Shimano BR-7403 brake caliper: I got a set of BR-R560 brakes but one of them was missing this piece – they are extremely easy to lose if trying to remove…
I wanted an upright stand for my pivot that would magnetically click into my gridfinity setup, so I created this simple model. The hole is a little big for the pivot to enable easy insertion and removal, but if you'd like it more snug,…
My footboard had gained alot of side to side play from what looked like the bearings the bolt goes through having been worn out, so I whipped this up in TinkerCad. I used .16mm layer height with PLA+ and 100% infill. 7 vertical &…
just a quick remix of exhaust cover, original cover would completely blank out exhaust, but i wanted to use pivot and canbus passthrough but at the same time maintain exhaust filter backbox. So just a quick remix, all i did is make the…
FreeCAD files are provided, so remixing and customizing is as easy as possible. If you find an issue in my models or have a request to modify them, please shoot me a message. UPDATES: V3 Bushing is now easier to install, previous model…
Niche bracket pair. Look at the supplied drawings for dimensions. Be sure to print both standing up on the bed to ensure roundness of the mating surfaces. I achieved a perfect slip fit between the parts in PETG with my printer's extrusion…
This is a large bench hold-down clamp with pivoting head. It is sized to use 3/8" bolts. I use it to hold test samples onto a vibration table for reliability testing but I'm sure there are lots of other uses for it. I'm using PETG with 5…
When using a hydration pack, I can never find a good way to attach the Go 3s--both the normal hat clip and Pivot clip fail to get reliable and good angles. And if you just use the pendant while wearing a pack, the straps will just knock…
