1 / 6
Headband hinge pivot fix for Sony WH-1000XM5 headphones — image 1
1 / 6

Headband hinge pivot fix for Sony WH-1000XM5 headphones

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fix for Sony XM5 headphones to repair pivot point on headband

Rating
4.75 / 5
Likes
22
Downloads
441
Makes
5
Views
1,636
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones.  The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to allow the ear cuff to continue to rotate.

The pieces should be oriented in such a way that no supports are required.  Should print fine with 0.2mm layer height.  I'd recommend using 3-4 wall loops.

Assembly requires 4x M2x8 self tapping flathead/countersunk screws (src A, src B, src C).  I'd recommend installing this on the non-broken side as well to reduce the likelihood that it breaks in the future.

Tags