Headband hinge pivot fix for Sony WH-1000XM5 headphones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix for Sony XM5 headphones to repair pivot point on headband
- Ocena
- 4,75 / 5
- Polubienia
- 22
- Pobrania
- 441
- Wydruki
- 5
- Wyświetlenia
- 1636
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones. The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to allow the ear cuff to continue to rotate.
The pieces should be oriented in such a way that no supports are required. Should print fine with 0.2mm layer height. I'd recommend using 3-4 wall loops.
Assembly requires 4x M2x8 self tapping flathead/countersunk screws (src A, src B, src C). I'd recommend installing this on the non-broken side as well to reduce the likelihood that it breaks in the future.