Pivoting tray stand for small objects/screws - *UPDATED .3mf*
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use this for storing small screws and such when I work on watches or camera lenses. The small trays pivot.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 78
- Makes
- 0
- Views
- 271
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a stand with holding trays that rotate around a post. I use this primarily for holding small screws while working on watches or camera lenses so that I know where they are and it has enough trays to allow me to organize them while I work. The post to base is a friction fit, so adjustment may be needed based on your printer. The trays pivot easily so you could tighten up the pivot hole or press the cap on tighter if you want them to have a bit of resistance.
You'll need to print 6 trays total or you can extend the post and add more as needed.