Pivoting tray stand for small objects/screws - *UPDATED .3mf*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use this for storing small screws and such when I work on watches or camera lenses. The small trays pivot.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a stand with holding trays that rotate around a post. I use this primarily for holding small screws while working on watches or camera lenses so that I know where they are and it has enough trays to allow me to organize them while I work. The post to base is a friction fit, so adjustment may be needed based on your printer. The trays pivot easily so you could tighten up the pivot hole or press the cap on tighter if you want them to have a bit of resistance.
You'll need to print 6 trays total or you can extend the post and add more as needed.