1 / 7
Ultrasonic Parking Assist - Arduino Nano — zdjęcie 1
1 / 7

Ultrasonic Parking Assist - Arduino Nano

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a full project for a parking assist device based on an Arduino Nano. When mounted on a garage wall, it…

Ocena
0 / 5
Polubienia
6
Pobrania
34
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a full project for a parking assist device based on an Arduino Nano. When mounted on a garage wall, it measures the distance to the vehicle and a LED strip displays green, amber, and red lights indicating the position. When it gets close to the desired park position the LED strip goes all red. The download includes the STL for an enclosure to hold the ultrasonic module and Nano which are soldered to a 70mm x 30mm protoboard.

The download also includes the schematic and Arduino code. A printable cover for the LED strip can be fount at https://www.thingiverse.com/thing:4819400

I used a LED strip of 65 LEDs (about 4 feet). I used this one: https://www.amazon.com/gp/product/B07R6LR7DK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The number of LEDs, and distance parameters, are settable in the code.

Mount the ultrasonic enclosure on the wall facing the incoming vehicle and at grill height. The LED strip can go anywhere.

The LED strip will go out after about 20 seconds after no more movement is detected. The ultrasonics will then checks ever second to see if there is forward movement, and re-lights the LED strip if there is.

Print Settings

Rafts:

No

Supports:

No

**Resolution:**

200

Infill:

20

**Filament:** Hatchbox PLA Grey

Category: Electronics

Tagi