1 / 7
Ultrasonic Parking Assist - Arduino Nano — image 1
1 / 7

Ultrasonic Parking Assist - Arduino Nano

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a full project for a parking assist device based on an Arduino Nano. When mounted on a garage wall, it…

Rating
0 / 5
Likes
6
Downloads
34
Makes
0
Views
199
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This is a full project for a parking assist device based on an Arduino Nano. When mounted on a garage wall, it measures the distance to the vehicle and a LED strip displays green, amber, and red lights indicating the position. When it gets close to the desired park position the LED strip goes all red. The download includes the STL for an enclosure to hold the ultrasonic module and Nano which are soldered to a 70mm x 30mm protoboard.

The download also includes the schematic and Arduino code. A printable cover for the LED strip can be fount at https://www.thingiverse.com/thing:4819400

I used a LED strip of 65 LEDs (about 4 feet). I used this one: https://www.amazon.com/gp/product/B07R6LR7DK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The number of LEDs, and distance parameters, are settable in the code.

Mount the ultrasonic enclosure on the wall facing the incoming vehicle and at grill height. The LED strip can go anywhere.

The LED strip will go out after about 20 seconds after no more movement is detected. The ultrasonics will then checks ever second to see if there is forward movement, and re-lights the LED strip if there is.

Print Settings

Rafts:

No

Supports:

No

**Resolution:**

200

Infill:

20

**Filament:** Hatchbox PLA Grey

Category: Electronics

Tags