1 / 11
Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail — zdjęcie 1
1 / 11

Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pretty much what the title says.

Ocena
0 / 5
Polubienia
20
Pobrania
86
Wydruki
0
Wyświetlenia
623
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Have a BCAR & a lower picatinny rail on your Venom Pro.

Print on its nose with organic supports (ensure you adjust your top z-distance.  I used a .12 layer height with a .16 top z-distance and the supports came right off with no issues.  I would not recommend more than a .16 layer height due to the threading (adjust your top z-distance accordingly, and please let me know your results.)

Added a nub on the left hand side, inside the mounting surface.  When you slide it on, it will go on a little tighter, but once you get it all the way, the nub will slot into the outer open area of the screw cavity on the blaster, which provides a very positive connection and better retention.  I expect in the heat of a game, with a handle on the rail or whatever other accessories, this might be better performing.  Retention with the nub is *phenomenal*. 

Adjusted rail profile from original to improve fit for picatinny accessories.  It appears to work with a wide variety of things, now.  Added a couple alternate versions - they have a slightly adjusted fit on the blaster, and one of them is aesthetically different on the front.  I prefer that one but print what you like.

Added some non-BCAR fronts in case you wanted a sweet rail without the BCAR but didn't like the threads.  Print (most) of these at .12 layer height on their fronts, with 1 exception - see file notes.

 

Tagi