1 / 11
Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail — image 1
1 / 11

Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pretty much what the title says.

Rating
0 / 5
Likes
20
Downloads
86
Makes
0
Views
623
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Have a BCAR & a lower picatinny rail on your Venom Pro.

Print on its nose with organic supports (ensure you adjust your top z-distance.  I used a .12 layer height with a .16 top z-distance and the supports came right off with no issues.  I would not recommend more than a .16 layer height due to the threading (adjust your top z-distance accordingly, and please let me know your results.)

Added a nub on the left hand side, inside the mounting surface.  When you slide it on, it will go on a little tighter, but once you get it all the way, the nub will slot into the outer open area of the screw cavity on the blaster, which provides a very positive connection and better retention.  I expect in the heat of a game, with a handle on the rail or whatever other accessories, this might be better performing.  Retention with the nub is *phenomenal*. 

Adjusted rail profile from original to improve fit for picatinny accessories.  It appears to work with a wide variety of things, now.  Added a couple alternate versions - they have a slightly adjusted fit on the blaster, and one of them is aesthetically different on the front.  I prefer that one but print what you like.

Added some non-BCAR fronts in case you wanted a sweet rail without the BCAR but didn't like the threads.  Print (most) of these at .12 layer height on their fronts, with 1 exception - see file notes.

 

Tags